Content material of the fabric
- Removing the Ceiling Fan Body and Motor
- Removing Flush-Mount Ceiling Fan Bodies
- Removing Downrod Ceiling Fan Bodies
- 4. Prep the fan
- Removing the Fan Housing
- 7. Add the switch housing
- Can Handyman change ceiling fan?
- 4. Separate connected ceiling fan wiring
- Removing the Fan Blades
- How Do I Cut the Power to My Ceiling Fan?
- Can a ceiling fan motor be rebuilt?
- At all times make sure you flip off the facility on the circuit breaker/fuse field any time you might be working with electrical energy.
Thanks! Useful Not Useful
- Watch out to not let your ceiling fan fall throughout elimination. Hold grip on the heavy motor physique whereas the screws holding it up are being loosened.
Thanks! Useful Not Useful
Eradicating the Ceiling Fan Physique and Motor
Ceiling followers are available in two classes: downrod followers and flush-mount followers. Because the title suggests, downrod followers droop the primary fan physique on the finish of a rod. Flush-mount followers have the primary physique and motor mounted near the ceiling.
Eradicating Flush-Mount Ceiling Fan Our bodies
Flush-mount followers generally use a screw and hinge to safe the fan motor to the ceiling bracket. Use your screwdriver to take away the screw and permit the fan to hold from the hinge. Discover the wires from the ceiling that hook up with the fan. Take away the plastic caps or wire nuts that join these wires collectively, then separate the connections. Subsequent, take away the fan physique from the hinge and take it down.
Extra Associated Articles:
- How to Install a Ceiling Fan
- As the Seasons Change, So Should the Direction of Your Ceiling Fan
- Best Outdoor Ceiling Fans
- What Size Air Conditioner Do I Need?
- Do You Need a Zoned HVAC System?
Eradicating Downrod Ceiling Fan Our bodies
Downrod ceiling followers include a metallic cowl that conceals the mounting bracket the place the rod connects to the ceiling. These covers generally use a screw to carry them in place. Some could have an ornamental ring that covers the screw that may must be eliminated by hand. Together with your screwdriver, take away the screw on the duvet and slide the duvet right down to the underside of the rod on the fan physique. Comply with the wires from the ceiling to the place they join with the fan’s wires. Take away the wire nuts and separate the wire connections.
There must be a ball on the ceiling finish of the rod. Assist the load of the fan motor as you slide the ball out of the ceiling bracket.
4. Prep the fan
This subsequent step will depend upon the make and mannequin of your explicit fan, so comply with the instructions to assemble it accurately.
For ours, we put in the cover and obtain meeting, ensuring to deliver the wires right through. You may additionally have to seize your wire cutters and reduce the wires a bit shorter at this level.
Eradicating the Fan Housing
Loosen the screws to take the fan unit off the bottom plate. With an older fan chances are you’ll want somebody to carry it, whilst you unhook the wires. Test the field with a non contact tester earlier than you fiddle inside. Look to see if there’s a upkeep hook. Hold the fan there, whether it is obtainable. Unhook the wires and put the wire nuts again on.
It’s unlikely that the outdated base plate shall be appropriate for the brand new fan. You possibly can examine them if you wish to. Take away the outdated base plate and mounting screws. Hold onto the mounting screws, chances are you’ll want them. Thus far so good, on this wiring a ceiling fan undertaking.
7. Add the swap housing
You’ll probably put your swap housing into place utilizing screws. There shall be a wire plug that goes from the higher to the decrease swap housing. Be sure that this connection is safe, as a result of it’s what turns the fan on.
Can Handyman change ceiling fan?
Rent an electrician or handyman to hold a ceiling fan. If the job entails changing a ceiling fan, a handyman can most likely do the work. In the event you’re placing a ceiling fan in a location the place there wasn’t a fan or mild fixture earlier than, otherwise you want new wiring or a brand new circuit to energy the fan, contact an electrician.
4. Separate related ceiling fan wiring
With downrod followers, you’ll have to take away the cover first. Then you’ll be able to start eradicating the wire nuts and disconnecting the fan wires from the home wires. In case your ceiling fan has a distant receiver wired within the cover, make sure you take away the wire nuts and disconnect the distant receiver wires from the fan and ceiling.
When you take away the sunshine and blades out of your low-profile followers, you’ll be able to take away the cover to start disconnecting the wires from the fan, ceiling, and any distant receiver. Low profile ceiling followers typically connect to the mounting bracket from a hinge on one aspect that you could relaxation the fan, making it simpler so that you can use each palms for unwiring the ceiling fan.
NOTE: In case you are uncomfortable with the wiring portion of eradicating a ceiling fan, seek the advice of with an authorized, skilled electrician.
Eradicating the Fan Blades
Ceiling followers are awkward to deal with with the blades put in. The blades ought to have screws or bolts on the highest aspect of the blade that goes down right into a metallic bracket that’s connected to the fan motor.
Every blade may have three or 4 screws that maintain it in place. Take away the blades separately. Save the screwes if you’re planning on putting in the fan someplace else.
How Do I Lower the Energy to My Ceiling Fan?
For security causes, you’ll need to transcend simply turning off the swap or knob on the wall. Make sure you narrow the facility to the circuit that serves your ceiling fan. This implies turning the facility off to the circuit on the breaker field. In case your breaker field is appropriately labeled, it is best to be capable of discover the proper breaker shortly.
Nevertheless, to make certain you’ve reduce the facility to the ceiling fan, comply with just a few steps:
1. From the controls on the wall or the distant, flip the fan or lights on.
2. On the breaker field, flip the suitable breaker off. In the event you don’t know which it’s, begin turning smaller breakers off separately as you verify to see if the ceiling fan remains to be on.
3. As soon as the ceiling fan turns off from the breaker, you’ve got successfully reduce the facility to the circuit.
Can a ceiling fan motor be rebuilt?
If the motor does prove to really be the issue, you’ll be able to actually change it. Some motors merely plug out and in of the fan. In the event you’re not fortunate sufficient to have a kind of, you’ll should wire the brand new motor into place, matching the coloured wires.