How Much Does it Cost to Install a Ceiling Fan? | Hunter Fan

$75 $150

The common value of ceiling fan set up is $75 to $150 with most householders spending round $150 to $350 for each elements and labor. Hiring a handyman to put in your ceiling fan will value $50 to $75 per hour and sometimes take 1.5 to 2 hours. If an electrician is required, the hourly charge averages $40 to $100 per hour and it’ll take two hours or extra. Get free estimates from fan installers close to you.

Get free estimates

Can you put in a ceiling fan with out wiring?

You don’t want to put in a ceiling fan with out wiring. So while you don’t have the wiring, you’ll have to put in {the electrical} field your self. One change is for the fan and the opposite change is for the sunshine attachment. Even when you don’t plan so as to add a lightweight now, run the wire for a second change.

Video

The place Ought to Ceiling Followers Be Put in?

Put ceiling followers in all of the rooms the place your loved ones spends loads of time. The kitchen, the household room, the den, and the bedrooms are apparent selections. Some folks have followers in all of the rooms, and even on the patio and within the workshop or storage. Ceiling followers can tremendously improve the décor of any room, as there are actually a whole lot of colors and designs to select from. Ceiling followers additionally present wonderful lighting choices, as nicely. Merely select the ceiling fan that fits your private fashion and décor and Knowledgeable Electrical will likely be very happy to put in it for you.

Optimum Sizing, Velocity, and Placement

Use this components to seek out the most effective fan dimension for a room’s occupied area (the a part of the room the place folks collect probably the most): Occupied area (in sq. toes) divided by 4 equals the blade span (in inches). Step blade span down a bit for rooms with low ceilings, and go wider if the ceilings are excessive.

One other good rule of thumb is to keep in mind that blade spans of lower than 36 inches are perfect for areas smaller than 75 sq. toes, equivalent to baths and breakfast nooks. Spans of 36 to 42 inches work in rooms of as much as 225 sq. toes, like a eating room. Bigger residing rooms and bedrooms can deal with 50- to 54-inch blades.

Ensure that the cubic toes of air that the fan strikes per minute (cfm), measured at excessive pace, is close to the highest of its class. Some 52-inch followers, for example, charge as little as 2,050 cfm, whereas others attain 7,800. Excessive-cfm followers not solely present a greater breeze, they normally have sturdy motors that can last more and run extra quietly.

For optimum efficiency, the fan needs to be hung at the very least 1 1/2 toes from the wall or a sloped ceiling, 7- to 10-feet from the ground, and at the very least 8 inches from the ceiling. Keep away from hanging the fan too near any lights, as rotating blades below a bulb will create an annoying flicker.

How tough is it to put in a ceiling fan?

1 out of 5 Simple Considerably simple. It takes a bit of labor to put in a fan-approved electrical field, however the ceiling-fan meeting and set up are very easy.

Extra Ceiling Fan Options

• Lights – Ceiling followers are both designed with or with out lights, however extra generally they’re designed to incorporate lights as in lots of circumstances a home-owner is changing a lightweight fixture with a ceiling fan. Out of doors ceiling followers usually tend to come with out lights included.
• Ceiling fan with a distant – Ceiling followers with distant controls begin at round $70 and may be as a lot as $1,100, relying on the model and different design options. You don’t have to put in a brand new fan to have a working distant management since a remote-control package in your fan may be bought for $20–$100. It ought to take about an hour for an skilled employee to finish the duty, and in case your handyman is ready to set up the distant management within the fan housing, it can seemingly value round $75, or when you rent an electrician to do the work, the overall value will likely be round $120.
• Ceiling fan distant app – Good know-how provides householders the power to schedule a ceiling fan to work together with the HVAC, with responsive on-off controls primarily based on temperatures inside the house. Many merchandise are additionally appropriate with the like of Nest, Alexa, and Google Residence, and that enables for the addition of options like with the ability to management the fan utilizing voice, or over the web when away from the home.

Return to Top

7. Add the change housing

You’ll almost certainly put your change housing into place utilizing screws. There will likely be a wire plug that goes from the higher to the decrease change housing. Be sure that this connection is safe, as a result of it’s what turns the fan on.

3. Set up the ceiling bracket

Now it’s time to put in items of the brand new fan. First up is the ceiling bracket. Use the screws that include the brand new fan, and safe it into the holes on {the electrical} field.

Deliver the wires from the ceiling by way of the middle gap. In our case, that was one white wire and one yellow wire (plus the inexperienced one on the ceiling bracket).

Ceiling fan equipment

Relying on the ceiling top for the place you’re putting in the ceiling fan or if you need further controls, the ceiling fan value can go up.  

 

Should you’re putting in the ceiling fan in a room with excessive ceilings, you’ll want an extension downrod. Ceiling fan downrods can value between $10 to $75, relying on the size. To find out what dimension extension downrod you want, merely take your ceiling top in toes and subtract 8. You’ll have to convert that measurement to inches as a result of ceiling fan downrods are measured in inches. 

For sloped or vaulted ceilings exceeding 34 levels, a sloped ceiling adapter is required to make sure correct ceiling fan set up. The sort of adapter prices about $37 and replaces the ceiling fan cover that comes along with your fan.

  

If you wish to add an extra ceiling fan management or add a wall management to a fan with handheld distant, an accessory control will add an extra $30 to $100 to your ceiling fan set up value. Usually, the distant receiver is included with the accent management; if it isn’t, it may well value round $30 for the mandatory receiver. Take into account that when you’re including a wall management to your fan, there could also be further work required at your wall change. You’ll be able to all the time attain out to an authorized, skilled electrician for assist.  

 

Be taught extra about what equipment you want or would possibly need in your ceiling fan set up by testing our ceiling fan buying guide.  

How a lot does a ceiling fan value?

Based on numerous equipment retailers, ceiling followers can value about $100 – $500, relying on the sort and the fabric it’s created from.

• Followers with powder-coated metallic blades are usually the most affordable. These are for normal objective, however could finally corrode, notably when you stay near the coast.
• Followers with timber blades are costlier however are mentioned to be quieter when the fan is on.
• Followers with chrome steel blades are costlier once more however could also be well worth the funding for coastal properties.

Whereas most individuals normally purchase followers to chill and flow into air on sizzling days, there are additionally reversible followers which can be designed to re-distribute the new air that rises to the ceiling from heaters in winter, providing you with the most effective of each worlds all yr spherical.

Store On-line Store On-line

How lengthy does it take to put in a ceiling fan?

The precise necessities for every set up range from job to job, however your installer ought to advise you ways lengthy it can take. Nonetheless, it usually takes about one to 2 hours to put in a ceiling fan for the primary time.

Ceiling Fan Upkeep Ideas

With a purpose to maintain your ceiling fan in optimum working situation, ceiling fan upkeep is extraordinarily essential. Under are a number of the upkeep duties you can carry out in your ceiling fan:

1. Cleansing

Additional time a ceiling fan’s blades can acquire mud. As soon as mud has collected on the blades, it may well grow to be airborne throughout use. This both spreads the mud by way of the air, which isn’t pleasant for anybody within the room, or it may be sucked into the motor. If an excessive amount of mud is drawn into the motor, it may end up in shaking and trigger the motor to run sizzling. This may result in an costly restore payments down the street. It is best to clear your ceiling fan at the very least annually. Begin by cleansing the blades with a brush after which use a humid, soapy fabric to take away the remaining sticky stains. Go away the fan to dry earlier than utilizing it once more.

2. Lubrication

Most machines with transferring elements require lubrication frequently. Older ceiling followers require lubrication whereas newer followers are self-lubricating. In case you are uncertain whether or not your fan requires lubrication, verify the proprietor’s handbook. In case your fan shouldn’t be correctly lubricated the motor can grow to be broken and trigger electrical fires. To lubricate your ceiling fan, use any gentle oil to fill the oil gap that’s situated on the topside of the motor. Fill this gap till the oil flows over after which take away the surplus with a tissue or rag.

3. Warning Indicators

When beginning up your fan for the summer time, there are a number of issues that may generate due to lack of upkeep:

• Noise – In case your fan is turning into noisy, verify all of the connections on the fixture. Tighten all of the screws to make sure that nothing is transferring or shaking throughout use. In case your fan continues to make noise throughout use contact knowledgeable to verify for a bigger downside.
• Unhealthy odor – In case your fan is emitting a nasty odor this might seemingly be because of the motor overheating. An excessive amount of mud has gotten into the motor or it has not been correctly lubricated. Have an knowledgeable verify the fan to make it possible for it’s secure to run and stop additional injury to the fan or your house.
• Wobbling – Wobbling may be the results of an improper weight-alignment. This may occur because of quite a lot of components, together with: warped blades, bent blade irons, blades or blade irons not being screwed on straight, blades being completely different weights or shapes or sizes. A wobbling fan may be harmful and comprise the safety of the fan.

Tags