How do I hang heavy curtains when wall is concrete? Nails aren’t

Strategies To Dangle Curtains On Concrete Partitions

You can hang curtains by drilling the concrete partitions for the {hardware}.

But when your rental place doesn’t allow you to create a gap within the wall, you may as effectively resort to the next technique that doesn’t require drilling.

Listed below are the strategies on grasp curtains on concrete partitions:

Methodology #1. With drilling

Under are the steps to observe in the event you decide to drill curtain {hardware} on the concrete partitions.

Step #1. Place your mounting {hardware} on the spot the place you plan to put in them

You must measure the peak of the brackets to make sure that the rod will probably be degree.

Mark the positions of every screw gap on the wall for the mounting hardware utilizing your pencil.

Step #2. You must lock a carbide masonry bit into the drill

Do not forget that the bit should be sufficiently big to create a gap that may securely accommodate the anchors.

Don’t forget to put on your security goggles earlier than you begin.

Step #3. Place the bit’s tip on the mark on the wall that you just made within the earlier step

Now maintain the drill with bit positioned horizontally,

Set the drill set onto its sluggish pace setting and begin drilling a pilot gap first.

The opening should be a bit longer than your wall anchors.

Gently faucet or press the wall anchors in direction of the pilot gap utilizing a hammer in order that you’ll flush its opening onto the wall.

Repeat the identical course of in drilling extra pilot holes and putting in the remaining wall anchors.

Step #4. Lastly, place the brackets

Guarantee to align all of its screw holes with the wall anchors.

Go via the mounting screw tip into the bracket and the anchor. Then, tighten the screws.

Repeat the method to make sure that the remainder of the mounting brackets are securely connected.

After you may have put in all of the brackets, you possibly can already grasp the curtains on the curtain rod.

Then, grasp these rods onto the mounting brackets you simply put in.

Methodology #2. With out drilling

In case you might be right here to search for a no-drill method in putting in curtains, you should use a spring stress rod.

They arrive in an array of lengths, colours, and designs.

One of these curtain {hardware} may be very straightforward to put in.

You should use it in any room from your home, and it’ll enable you create an aesthetically pleasing look with out the necessity to drill.

Under are the steps in mounting this curtain {hardware}.

Step #1. Measure the window space

You must measure the world of your window first.

Pay attention to the measurement.

Step #2. Begin measuring the size

Do that course of from the place you plan to mount the stress rod as much as the place you need your curtains to fall.

You’ll have to select from three completely different choices right here.

The curtains can present a swag treatment onto the stress rod, attain the room’s ground or fall midway.

Step #3. Mark the spot in your wall the place you plan to put in the rod

That’s to guarantee that it is going to be in a position to conform to the design of your curtain.

Use your pencil for this.

Then, twist the center of the stress rod to unscrew it. Proceed doing so till you may have absolutely prolonged it.

Slide the curtains onto the stress rod and grasp it after guaranteeing that the rod is already secured in place.

Step #5. Elevate the rod and the curtains

Do that course of into their desired place on the wall. Squeeze the stress rod to the middle.

This one can set off its spring in addition to compress the rod.

Because of this, it should match snugly in place.

Step #6. Kind a swag impact on the rod

Do that course of by recognizing its mid-point and folding the curtain in half.

Wrap the curtain across the curtain rod as soon as and gown the material onto any of the rod’s ends.

You’ll be able to even experiment to create extra designs. For example, you possibly can pull the ends of the curtains gently.

Do not forget that the extra you tug, the swag will probably be shorter and shorter.

Video

What sort of tape will follow concrete partitions?

Masking tape is likely one of the greatest tapes to make use of on concrete blocks. Regular masking tape can have minimal effectiveness, however there are various variations to masking tape, and a few of them are designed particularly to work on surfaces like concrete block.

DIY Magnetic Curtain

Should you're fortunate sufficient to have a steel door or window body, a DIY magnetic curtain is a straightforward and stylish answer for blocking pesky morning or brilliant night mild. Right here, the curtain challenge is sewn from scratch by stitching spherical magnets into the geometric-printed cloth, however you probably have present curtains or drapes that you just love, it's not laborious so as to add a couple of magnets so you possibly can grasp the curtains with this technique.

Brilliant DIY Magnetic Curtain from How Does She

Which Command hooks for curtains?

Buy 2-3 jumbo command hooks per window. Choose a end that’s the similar because the curtain rods you may be hanging. Clear wall floor the place you may be making use of hooks with rubbing alcohol and clear fabric or paper towel. Clear gently, rubbing too laborious can take away the paint.

Upholstery Tack Curtains

If it's okay to make small holes in your partitions, however you don't just like the look of cumbersome curtain rods, then these upholstery tacks are an ingenious answer for hanging curtains. Simply notice that whereas these look elegant and drape superbly, they’re extra for ornamental functions, as you gained't have the ability to open and shut the curtains as soon as they're tacked. When you take away the tacks from the wall, you should still must do some mild patching, however the harm will probably be far much less substantial than holes from drilling.

Tip To Hang Curtains Without Using A Rod from Lolly Jane

Tags