How to Install Paver Bricks Next to a Driveway

How to Install Paver Bricks Next to a Driveway

Brick Driveway Cost by Project Range

Low
$2,880

12’ x 24’ single-car driveway with non-dented pavers in an offset pattern

Average Cost
$11,500

24’ x 24’ double driveway with molder pavers in a herringbone pattern

High $25,000 24’ x 36’ heated triple driveway with a circular fully interlocked pattern

Video

7. Add Another Layer of Sand

Pour sand on top of the pavers once you have completed laying them. Use a push broom to sweep this sand into the cracks between the pavers, advises This Old House. You may want to have someone hold the pavers in place while you sweep the sand to make sure the bricks don’t shift.

Top Brands of Brick Pavers

Because brick pavers are a very heavy building material, they are generally molded and fired at local brickyards rather than manufactured and shipped long distances. There are no nationally-recognized brands for brick pavers, but try to buy from a well-established, reputable local source.

Step 2

Temporarily mark the location of the driveway with two hoses, one for each side. Stand back and evaluate the appearance and clearances for the driveway. When you’re sure you have it where you want it, use temporary marking spray paint to mark the edges of the driveway.

Tools Materials

  • Backhoe

    Backhoe

  • Shovel

    Shovel

  • Garden rake

    Garden rake

  • Plate compactor

    Plate compactor

  • Circular saw with diamond blade

    Circular saw with diamond blade

  • Mason line

    Mason line

  • Garden stakes

    Garden stakes

  • Steel pipe - 2” diameter

    Steel pipe – 2” diameter

  • 2x4 lumber

    2×4 lumber

Brick Paver Installation

Brick pavers can be set in a base of either paver sand or mortar. As with any driveway material, the key to a good brick paver surface is a well-prepared base—especially when paving a driveway that must support a lot of weight. Outline the area you intend to pave using layout strings, then remove the soil (or the existing paving) to a depth of at least 12 inches. Add 8 to 12 inches of gravel to the excavated area, compacting the gravel periodically as you add layers. Compacting the gravel again after each 2 to 4 inch layer is added. Then add a 1 1/2-inch layer of sand and level it. When the base is ready, start laying bricks in whatever pattern you like.

Installation usually begins with the perimeter bricks, which are sometimes set in concrete to establish a solid edging that will hold the field bricks in place. As the field bricks are installed, they are periodically flattened and "set" by pounding with a mallet. Bricks can be cut individually, but it can be much quicker to trim the edges all at once with a handheld circular saw or rented wet saw fitted with a diamond blade.

Upon completion, the brick surface is flattened and leveled with a heavy roller, then the cracks between bricks are filled with loose sand or mortar. Sand-setting is an increasingly preferred method for environmental reasons since it allows rainwater to seep through into the ground.

The Spruce / Kaley McKean

4. Add a Layer of Sand

Pour 2 inches of sand on top of the gravel layer. Tamp and level this layer using your tamper until the sand is firm. Lightly sprinkle the area using a garden hose to allow the material to settle completely.

Paver And Brick Driveway Styling

There are dozens of options for Madison WI driveway paving when it comes to laying down a brick or concrete pave walk or driveway. Almost anything available for a patio or backyard hardscape can be continued in areas designed to move people and vehicles. Style and design choices include:• Paver colors – colors from hues chosen to match your roof or trim to natural tones are available. Visually connecting roof and trim colors to decorative driveways and walks is a promising trend.• Contrasting walks and borders – when you design your driveway consider walks and borders that complement the color and texture without copying it.• Patterns – the most traditional pattern for brick is a herringbone with pavers set at 45-degree angles to the garage. This pattern interlocks to prevent shifting – ideal for high traffic areas. Gaining popularity for contemporary looks are basket weave designs and an ashlar pattern. Ashlar and herringbone patterns are top choices for permeable paver installation.• Unique touches – let your inner artist loose with a custom design within your paver and brick driveway designs. Your embellishments can be simple pattern changes at the driveway entrance or garage apron. Add a “carriage drop” – a place by the front walk or garage door where a carriage would drop off passengers in another era. Contemporary looks include circles, fans and mosaics.

Pros Cons of Brick Driveways

Natural brick pavers offer a distinctive style that is well suited for folks who want a rustic or traditional look. They retain their natural color well, are stain resistant and are made from all-natural clay.

On the downside, there is less variety in terms of color, shape and size when you are working with bricks as opposed to concrete pavers, which come in a seemingly endless array of colors and styles. Because of the limited sizes and shapes, you are also limited in the patterns you can create when designing a brick driveway.

Natural bricks are more likely to break or crack from heavy traffic or if you live in an area with hard freezes.

Brick and Grass Driveway

Another option for those who enjoy the look of brick pavers and the beauty of the natural outdoor world is a brick and grass driveway. What sets this option apart is how versatile it can be. For instance, you can have grass in between each row of brick pavers or make a large area of grass in the middle. In addition, it may require fewer brick pavers since part of the surface consists of grass. Adding grass to the pavers also makes it permeable and better for the environment. This type is often used by homeowners who want to install a driveway with a creative appearance. The cost of this driveway will be fairly similar to an all brick paver one but slightly less expensive at $6,000 to $15,000.

Get free estimates form brick driveway companies in your area

How Are Brick Pavers Made?

Natural brick pavers are made from prepared clay that is cast in molds (usually rectangular), and then baked at a high temperature in a kiln. Clay bricks made in this may will have a smooth surface on each side.

Alternatively, brick pavers can also be made by extruding clay through a die. This process creates a column-like length of brick material that is then cut with a wire to create individual bricks. These bricks are called extruded bricks or wire-cut bricks and have more surface texture. This texture makes extruded bricks more slip-resistant than molded bricks.

Some brick pavers are crafted with ridged edges to create an interlocking paver system for easier installation.

Step 10

Fill in along the edges with soil matching your natural landscaping. Tamp down the loose dirt and water it to compact the soil as much as possible. If it’s possible to grow ground covers, such as grass, in your area, seed the soil as the roots help keep the bricks from shifting.

Tamp the bricks in place repeatedly. Water down the drive to clean the bricks and settle the sand into the cracks.

Tags

Leave a Reply

Your email address will not be published.