Content of the material
- What to do when
- Your wipers smear water all over the windshield.
- Your wipers are chattering against your windshield.
- Water droplets won’t wipe away.
- How do you clean windshield wiper blades with wd40?
- Step 1: Prepare The Wipers
- Optional: Clean The Hinge
- Restoring Wiper Blades When the Rubber Hardens
- Softening the Rubber
- How to Clean Wiper Blades with WD40
- Recent Posts
- What Other Noises Do Damaged or Aged Wiper Blades Make?
- How To Turn Your Windshield Wipers On-2 Easy Steps, With Pictures
What to do when
Your wipers smear water all over the windshield
If your windshield wipers smear water all over your windshield, they aren’t doing any good. Luckily, there are a few different reasons why this might be happening and they all have easy solutions!
A common reason why your windshield wipers might be smearing water is worn wiper blades. Wiper blades are made out of soft rubber, so they inevitably wear out and need replacement over time. In fact, many automotive manufacturers recommend replacing wiper blades every six months.
If your wiper blades are new and you’re confident that old rubber isn’t the culprit, try these steps next:
- First, try cleaning your windshield thoroughly – dirt and grime can actually cause this annoying streaking and smearing.
- Clean your wiper blades by wiping them down with warm, soapy water, and wipe the edge of the blade with rubbing alcohol.
- If you’re still having issues with smearing water, try upgrading your wiper fluid.
Your wipers are chattering against your windshield
If your wipers are obnoxiously chattering away when you’re trying to use them, you’ll likely be left with smears and streaks. There are a few causes: either your wiper blades or windshield aren’t clean, the wiper arm is bent, or your wiper blades need replacing.
- First, give your windshield and wiper blades a deep cleaning.
- Wipe down the windshield with a strong glass cleaner.
- Clean your blades with warm, soapy water.
- This will remove any build-up, hopefully reducing the chattering and improving the wiper’s effectiveness.
If the wiper arm is bent the blade might not make full contact with the windshield, causing the chattering. Bring the wiper blade to your windshield and check if the blade is parallel to the glass. If it isn’t, you can use pliers to bend the arm back into proper shape or have a technician take a look!
If everything is clean and your wiper arm looks okay, it’s time to retire your current wiper blades and get some new ones!
Water droplets won’t wipe away
If the water droplets clinging to your windshield won’t budge, your visibility is going to go downhill, fast. If you’re dealing with this problem, you’re likely in an area with high pollution. The droplets are sticking to the layer of dirt and grime on your windshield instead of running off the glass like they should.
The best way to fix this is to give your windshield a thorough cleaning, followed by a water repelling treatment.
- First, remove all the grime with a powerful glass cleaner. It’s important to remove this layer of dirt so that you can apply a water repelling treatment directly to the windshield.
- After you’re satisfied with the windshield’s cleanliness, apply the water repelling treatment per its instructions.
That means that having the best windshield wipers is essential for safe driving vision! If these tricks don’t fix your wiper problem for good, it’s time to get your wiper blades replaced. Firestone Complete Auto Care is proud to carry TRICO® wiper blades.Whether you want to restore your vehicle back to its original performance, want maximum performance or live in an area with extreme weather conditions, TRICO has the sizes, styles, and replacement wiper blades to fit more vehicles on the road than any other wiper system manufacturer. Stop by your nearest Firestone Complete Auto Care for TRICO windshield wiper blades today!
How do you clean windshield wiper blades with wd40?
Alright so now you have used the other cleaning methods on your windshield wiper blades. Now you want to try something a little different, WD-40.
On a side note, I love WD 40, it has so many uses and you never know when you are going to need it. Turns out one of those uses is the cleaning and protecting of your windshield wipers.
Now really there is no difference in how you clean your wiper blades with WD 40 and these other cleaners. One thing you have to be mindful of though is you don’t want to get WD 40 on your windshield or on your car for that matter.
So spray the WD 40 directly onto a microfiber cloth and then wipe the blade down; if you are leaving the blade attached to your car.
If you are removing your wiper blade, then you could spray it directly onto the wipers and then wipe it off. That’s a lot of words to say try not to spray it on your car.
Personally, I would clean my blades with a cleaning agent first. I like to use Windex, and then use the WD 40. Almost like how you would apply wax after you wash your car.
Step 1: Prepare The Wipers
There are two positions you can have your wipers in before you clean them. You can leave them as they are and lift them off the windscreen until they are sticking out. You can also turn on the ignition, switch on your wipers, and turn off the ignition when they are pointing up. You will still pull them from the windshield so that they are pointing out.
Some people prefer one position over the other, so do whatever is comfortable for you. I have always cleaned the wipers when they are in their neutral position.
Pro Tip: Some wipers will be locked unless they are pointing up on your windshield, so you might have to move them into that position first.
Optional: Clean The Hinge
If you find that your wipers are sticking, or if you notice dirt around the hinge (where the wiper blade connects to the bracket), you should clean the hinge.
Refer to your instruction manual (if needed) to remove the wiper blade from the arm. Once you have it off, clean the end of the arm with warm soapy water. Do the same with the part of the wiper blade that connects to the arm.
Connect the wipers back to the arm.
Restoring Wiper Blades When the Rubber Hardens
It is important to understand how to go about restoring your wiper blades when the rubber has hardened. This is going to be a good thing to do that will let you keep using the blades for a bit longer. Hard rubber is really going to make it so that your wiper blades won’t work well at all. Luckily, it is possible to soften the rubber so that it can work as it was originally intended.
Softening the rubber is not going to be difficult at all. You just need to grab a few washcloths, some petroleum jelly, and a bottle of vinegar. Once you have these items, you will be ready to get started.
Softening the Rubber
Grab the necessary items, and then lift your wiper blades away from the windshield. Apply a little bit of vinegar to your washcloth, and wipe it along the length of your wiper blades. Two or three gentle passes should be enough to allow the rubber to soak up the vinegar. Now you want to grab another washcloth and wet it down with some water.
Using the new washcloth with water on it, you need to wipe the length of your wiper blades again. The purpose of this is to remove any excess vinegar. With this done, you can grab a dry washcloth. Now you need to dry the wiper blades as gently as you can.
The next step involves using the petroleum jelly. You want to apply some of this petroleum jelly to a cloth and wipe it along the rubber parts of your wiper blades. Try to ensure that the rubber soaks up the petroleum jelly properly. You want to let the petroleum jelly dry naturally using the air, so step away once you are finished.
You can now lower your wiper arms and the rubber of the blades should be softened. This will allow the wiper blades to work much better than they did when the rubber was hard. You should be prepared for rain, and it will be much easier to see while driving.
How to Clean Wiper Blades with WD40
- Lift up the wiper blades in the locking position. It will be much easier to clean the blades when they aren’t pressed down on the windshield. If you have an SUV or truck, you may need to completely remove the wiper blades.
- Spray a clean microfiber towel with WD40 Specialist Water Resistant Silicone Lubricant Spray. Then run the towel down the rubber section of the first wiper blade. You should hold the microfiber towel in one hand and the wiper blade with your other hand to stabilize it.
- Do this motion a few times to make sure that all dirt and grime gets removed from the rubber. This is critical, as you will not remove all the contaminants with just one swipe. Once this is done you can move on to the the next wiper blade.
- If there is a rear windshield wiper blade, don’t forget to clean it. Once all the wiper blades have been cleaned, make sure to visually inspect them. You can also run your finger over the rubber section to make sure it’s smooth. Repeat step three again if you feel any bumps or imperfections.
$19.95 Buy Now We earn a commission if you click this link and make a purchase at no additional cost to you. 04/26/2022 10:36 pm GMT
When you have completed all of the steps above, wait a few minutes before driving the car. You want to avoid any leftover WD40 liquid getting on your car’s paint when driving. It’s important to wipe off any excess residue to avoid this from happening.
- How To Keep Your Bike Smooth And Running Even In Winters
- How To Clean Your Car Like A Professional
- How To Make Sure That The Headlights And Brake Lights Of Your Car Are Visible
- Easy Chain Maintenance With WD-40
- Removing And Preventing Rust Build Up On Your Bike
What Other Noises Do Damaged or Aged Wiper Blades Make?
Your blades may not squeak; however, they may make a rubbing or clattering noise. This might get louder when the windshield is too dry to provide enough lubricant to give them a smooth track to run across. You may not even hear a noise but simply notice that your window isn’t getting cleared well.
Typically, the source of any of these problems will be similar to wiper blade issues that cause squeaking. In some cases, the assembly may also need to get adjusted because it doesn’t apply the right amount of pressure to the glass. In other cases, the wiper blades may need replacement or the wiper assembly might require an adjustment.
How To Turn Your Windshield Wipers On-2 Easy Steps, With Pictures
It’s a dark and stormy night and you are driving home. As the rain begins to fall you realize that you don’t know how to turn the windshield wipers on! You can’t see, what are you going to do? Don’t fret, we are going to cover how to turn your windshield wipers on. Generally speaking,…